Files can go missing on your storage devices if they get corrupted, are infected with malware, are unknowingly hidden or automatically moved by a program without user acknowledgement. Files that have actually disappeared and haven't been moved or artificially hidden can often be recovered with undeletion software that scans the hard drive for files that are no longer recorded in the file allocation table -- the storage device data that tracks where files start and end. Undeleted malware-infected files can re-infect a system if they aren't probably cleaned before use.
Plasmacam Software Zip Unzip
Download: https://miimms.com/2vJJOX
As computer file systems have grown more sophisticated, the incidence of file corruption has become less common -- but corruption still can cause files to disappear from storage devices. Files can be corrupted by another program injecting bad data or by any type of error that stops the computer from writing the file when saving like power failure and system crashes. Files that haven't been completely downloaded or copied can also disappear from the system if the program handling the data transfer doesn't support transfer resumes. Additionally, hardware and software errors that cause either the file copy process to fail or incorrectly update the file allocation table can also cause files to disappear. Depending on how much of the file is corrupted, it may be recoverable through undeletion.
Malicious software, particularly worms, can run rampant on a storage device and start deleting files. Other malware like viruses can cause files to disappear because when they try to rewrite a file during the infection process they may cause write errors that corrupt the file. Worms are malware that delete and modify files on a computer before jumping to another computer on a network. Files deleted by a worm may be recoverable through undeletion; however, they should be scanned by an anti-virus program because they could be infected by the worm and start the file deletion process over again.
FireControl is a proprietary controller software made by Langmuir Systems to operate the CrossFire line of CNC Plasma machines. The software was designed with several key features specific to plasma cutting while offering an easy-to-use interface. FireControl software is used to connect your computer's USB port to the CrossFire CNC Electronics unit for controlling the machine and for running cutting programs. The below User Guide explains the features of FireControl and how to setup and configure this software for use with your CrossFire CNC machine. We highly recommend reading this User Guide in its entirety before operating your machine and software.
After downloading the FireControl installer from our website, follow the onscreen installation prompts to correctly install the software on your computer. You will not need to restart your computer after installation. Be sure to note the folder on your computer where the software will be installed; we recommend creating a Desktop shortcut for quick access. Make sure that your CrossFire Machine is not connected to your computer's USB port when downloading FireControl software.
Before connecting the CrossFire machine to your computer for the first time, be sure to close FireControl software. Next, connect the provided USB cable from your electronics enclosure to an available USB port on your computer. When first connecting your device to the computer, it should automatically install the appropriate USB serial drivers for your computer; do not close or stop these processes from running. If you are running a Windows computer, a pop-up in the task bar will notify you when the drivers are correctly installed. For a computer running MacOS, the necessary drivers should already be pre-installed with your operating system and you may not see any activity when first plugging in your device.
After the drivers are auto-installed on your computer, you can now open FireControl software. The main FireControl workspace will be locked out until it makes a positive connection with a Langmuir Systems CNC electronics board (see image below).
In order to cut a program in FireControl, you will need to generate your program using a Langmuir Systems approved post processor for your CAM software or else it will not run (visit our Downloads page for access to our Fusion 360 and SheetCAM post processors for FireControl). We also suggest reading our CAM for FireControl Guide for instructions on how to create programs for running in FireControl from either Autodesk Fusion 360 or SheetCAM. A program generated without the use of our post processor will lack the necessary g-code formatting, IHS loop functions, and THC activation codes.
Straight Cut Mode is a feature within FireControl that allows you to quickly generate straight line cutting programs without having to use CAD or CAM software. This can be useful to trim down larger sheets of material for more convenient cutting or simply to make quick straight cuts on parts. To enable Straight Cut Mode, click the toggle button which will drop down the Straight Cut Mode menu.
Below is a list of our post processors from the legacy versions of software. These posts were originally created for the BobCAD-CAM standalone software V25-V28 and the BobCAM Plug-in for SolidWorks V2-V5.
These posts can be installed in the current versions of the software, however they have not been optimized for the newest version of the posting engine. They are using old post variables and do not have the newest post questions and blocks. Because of this some of the newer features of the software may not work, and some of the code output may be incorrect.
If you plan on installing and using these posts in the current versions of software, please do so at your own risk. Ensure proper testing is done prior to cutting anything on your machine. There will likely need to be some corrections made to the code before it can be used. 2ff7e9595c
Comments